@spec create(map() | keyword(), keyword()) ::
  {:ok, Twilio.Schemas.Call.t()} | {:error, Infusion.Runtime.Error.t()}

Create a new outgoing call to phones, SIP-enabled endpoints or Twilio Client connections

POST /2010-04-01/Accounts/{AccountSid}/Calls.json

{AccountSid} in the path is the :account_sid setting; pass account_sid: "..." as an option to use another.

Parameters

• application_sid - The SID of the Application resource that will handle the call, if the call will be handled by an application.
• async_amd - Select whether to perform answering machine detection in the background. Default, blocks the execution of the call until Answering Machine Detection is completed. Can be: true or false.
• async_amd_status_callback - The URL that we should call using the async_amd_status_callback_method to notify customer application whether the call was answered by human, machine or fax.
• async_amd_status_callback_method - The HTTP method we should use when calling the async_amd_status_callback URL. Can be: GET or POST and the default is POST.
• byoc - The SID of a BYOC (Bring Your Own Carrier) trunk to route this call with. Note that byoc is only meaningful when to is a phone number; it will otherwise be ignored. (Beta)
• call_reason - The Reason for the outgoing call. Use it to specify the purpose of the call that is presented on the called party's phone. (Branded Calls Beta)
• call_token - A token string needed to invoke a forwarded call. A call_token is generated when an incoming call is received on a Twilio number. Pass an incoming call's call_token value to a forwarded call via the call_token parameter when creating a new call. A forwarded call should bear the same CallerID of the original incoming call.
• caller_id - The phone number, SIP address, or Client identifier that made this call. Phone numbers are in E.164 format (e.g., +16175551212). SIP addresses are formatted as name@company.com.
• client_notification_url - The URL that we should use to deliver push call notification.
• fallback_method - The HTTP method that we should use to request the fallback_url. Can be: GET or POST and the default is POST. If an application_sid parameter is present, this parameter is ignored.
• fallback_url - The URL that we call using the fallback_method if an error occurs when requesting or executing the TwiML at url. If an application_sid parameter is present, this parameter is ignored.
• from (required) - The phone number or client identifier to use as the caller id. If using a phone number, it must be a Twilio number or a Verified outgoing caller id for your account. If the to parameter is a phone number, From must also be a phone number.
• machine_detection - Whether to detect if a human, answering machine, or fax has picked up the call. Can be: Enable or DetectMessageEnd. Use Enable if you would like us to return AnsweredBy as soon as the called party is identified. Use DetectMessageEnd, if you would like to leave a message on an answering machine. If send_digits is provided, this parameter is ignored. For more information, see Answering Machine Detection.
• machine_detection_silence_timeout - The number of milliseconds of initial silence after which an unknown AnsweredBy result will be returned. Possible Values: 2000-10000. Default: 5000.
• machine_detection_speech_end_threshold - The number of milliseconds of silence after speech activity at which point the speech activity is considered complete. Possible Values: 500-5000. Default: 1200.
• machine_detection_speech_threshold - The number of milliseconds that is used as the measuring stick for the length of the speech activity, where durations lower than this value will be interpreted as a human and longer than this value as a machine. Possible Values: 1000-6000. Default: 2400.
• machine_detection_timeout - The number of seconds that we should attempt to detect an answering machine before timing out and sending a voice request with AnsweredBy of unknown. The default timeout is 30 seconds.
• method - The HTTP method we should use when calling the url parameter's value. Can be: GET or POST and the default is POST. If an application_sid parameter is present, this parameter is ignored.
• passports - The STIR/SHAKEN passport for this call, provided as a base64 encoded string. Multiple passports (at max 5) are comma separated and provided as base64 encoded string
• record - Whether to record the call. Can be true to record the phone call, or false to not. The default is false. The recording_url is sent to the status_callback URL.
• recording_channels - The number of channels in the final recording. Can be: mono or dual. The default is mono. mono records both legs of the call in a single channel of the recording file. dual records each leg to a separate channel of the recording file. The first channel of a dual-channel recording contains the parent call and the second channel contains the child call.
• recording_configuration_id - The identifier of the configuration to be used when creating and processing the recording
• recording_status_callback - The URL that we call when the recording is available to be accessed.
• recording_status_callback_event - The recording status events that will trigger calls to the URL specified in recording_status_callback. Can be: in-progress, completed and absent. Defaults to completed. Separate multiple values with a space.
• recording_status_callback_method - The HTTP method we should use when calling the recording_status_callback URL. Can be: GET or POST and the default is POST.
• recording_track - The audio track to record for the call. Can be: inbound, outbound or both. The default is both. inbound records the audio that is received by Twilio. outbound records the audio that is generated from Twilio. both records the audio that is received and generated by Twilio.
• send_digits - The string of keys to dial after connecting to the number, with a maximum length of 32 digits. Valid digits in the string include any digit (0-9), 'A', 'B', 'C', 'D', '#', and '*'. You can also use 'w' to insert a half-second pause and 'W' to insert a one-second pause. For example, to pause for one second after connecting and then dial extension 1234 followed by the # key, set this parameter to W1234#. Be sure to URL-encode this string because the '#' character has special meaning in a URL. If both SendDigits and MachineDetection parameters are provided, then MachineDetection will be ignored.
• sip_auth_password - The password required to authenticate the user account specified in sip_auth_username.
• sip_auth_username - The username used to authenticate the caller making a SIP call.
• status_callback - The URL we should call using the status_callback_method to send status information to your application. If no status_callback_event is specified, we will send the completed status. If an application_sid parameter is present, this parameter is ignored. URLs must contain a valid hostname (underscores are not permitted).
• status_callback_event - The call progress events that we will send to the status_callback URL. Can be: initiated, ringing, answered, and completed. If no event is specified, we send the completed status. If you want to receive multiple events, specify each one in a separate status_callback_event parameter. See the code sample for monitoring call progress. If an application_sid is present, this parameter is ignored.
• status_callback_method - The HTTP method we should use when calling the status_callback URL. Can be: GET or POST and the default is POST. If an application_sid parameter is present, this parameter is ignored.
• time_limit - The maximum duration of the call in seconds. Constraints depend on account and configuration.
• timeout - The integer number of seconds that we should allow the phone to ring before assuming there is no answer. The default is 60 seconds and the maximum is 600 seconds. For some call flows, we will add a 5-second buffer to the timeout value you provide. For this reason, a timeout value of 10 seconds could result in an actual timeout closer to 15 seconds. You can set this to a short time, such as 15 seconds, to hang up before reaching an answering machine or voicemail.
• to (required) - The phone number, SIP address, or client identifier to call.
• trim - Whether to trim any leading and trailing silence from the recording. Can be: trim-silence or do-not-trim and the default is trim-silence.
• twiml - TwiML instructions for the call Twilio will use without fetching Twiml from url parameter. If both twiml and url are provided then twiml parameter will be ignored. Max 4000 characters.
• url - The absolute URL that returns the TwiML instructions for the call. We will call this URL using the method when the call connects. For more information, see the Url Parameter section in Making Calls.

@spec create!(map() | keyword(), keyword()) :: Twilio.Schemas.Call.t()

Like create/2, but returns the result or raises Infusion.Runtime.Error.

@spec delete(String.t(), keyword()) ::
  {:ok, nil} | {:error, Infusion.Runtime.Error.t()}

Delete a Call record from your account. Once the record is deleted, it will no longer appear in the API and Account Portal logs.

DELETE /2010-04-01/Accounts/{AccountSid}/Calls/{Sid}.json

Path parameters

• sid (required) - The Twilio-provided Call SID that uniquely identifies the Call resource to delete

{AccountSid} in the path is the :account_sid setting; pass account_sid: "..." as an option to use another.

@spec delete!(String.t(), keyword()) :: nil

Like delete/2, but returns the result or raises Infusion.Runtime.Error.

@spec list(map() | keyword(), keyword()) ::
  {:ok, Twilio.Schemas.CallsListResponse.t()}
  | {:error, Infusion.Runtime.Error.t()}

Retrieves a collection of calls made to and from your account

GET /2010-04-01/Accounts/{AccountSid}/Calls.json

{AccountSid} in the path is the :account_sid setting; pass account_sid: "..." as an option to use another.

Parameters

• to - Only show calls made to this phone number, SIP address, Client identifier or SIM SID.
• from - Only include calls from this phone number, SIP address, Client identifier or SIM SID.
• parent_call_sid - Only include calls spawned by calls with this SID.
• status - The status of the calls to include. Can be: queued, ringing, in-progress, canceled, completed, failed, busy, or no-answer.
• start_time - Only include calls that started on this date. Specify a date as YYYY-MM-DD in UTC, for example: 2009-07-06, to read only calls that started on this date.
• start_time_query - Only include calls that started before this date. Specify a date as YYYY-MM-DD in UTC, for example: 2009-07-06, to read only calls that started before this date.
• start_time_query_2 - Only include calls that started on or after this date. Specify a date as YYYY-MM-DD in UTC, for example: 2009-07-06, to read only calls that started on or after this date.
• end_time - Only include calls that ended on this date. Specify a date as YYYY-MM-DD in UTC, for example: 2009-07-06, to read only calls that ended on this date.
• end_time_query - Only include calls that ended before this date. Specify a date as YYYY-MM-DD in UTC, for example: 2009-07-06, to read only calls that ended before this date.
• end_time_query_2 - Only include calls that ended on or after this date. Specify a date as YYYY-MM-DD in UTC, for example: 2009-07-06, to read only calls that ended on or after this date.
• page_size - How many resources to return in each list page. The default is 50, and the maximum is 1000.
• page - The page index. This value is simply for client state.
• page_token - The page token. This is provided by the API.

To read every item across all pages, use list_all.

@spec list!(map() | keyword(), keyword()) :: Twilio.Schemas.CallsListResponse.t()

Like list/2, but returns the result or raises Infusion.Runtime.Error.

@spec list_all(map() | keyword(), keyword()) ::
  {:ok, Enumerable.t()} | {:error, Infusion.Runtime.Error.t()}

Like list/2, but returns every item, from every page: a lazy stream of Twilio.Schemas.Call.t() that fetches pages as it is read.

The first page is fetched right away, so its errors are returned; a later page that fails raises Infusion.Runtime.Error. Stopping early (Enum.take/2) fetches no more pages.

@spec list_all!(map() | keyword(), keyword()) :: Enumerable.t()

Like list_all/2, but returns the stream or raises Infusion.Runtime.Error.

@spec retrieve(String.t(), keyword()) ::
  {:ok, Twilio.Schemas.Call.t()} | {:error, Infusion.Runtime.Error.t()}

Fetch the call specified by the provided Call SID

GET /2010-04-01/Accounts/{AccountSid}/Calls/{Sid}.json

Path parameters

• sid (required) - The SID of the Call resource to fetch.

{AccountSid} in the path is the :account_sid setting; pass account_sid: "..." as an option to use another.

@spec retrieve!(String.t(), keyword()) :: Twilio.Schemas.Call.t()

Like retrieve/2, but returns the result or raises Infusion.Runtime.Error.

@spec update(String.t(), map() | keyword(), keyword()) ::
  {:ok, Twilio.Schemas.Call.t()} | {:error, Infusion.Runtime.Error.t()}

Initiates a call redirect or terminates a call

POST /2010-04-01/Accounts/{AccountSid}/Calls/{Sid}.json

Path parameters

• sid (required) - The Twilio-provided string that uniquely identifies the Call resource to update

{AccountSid} in the path is the :account_sid setting; pass account_sid: "..." as an option to use another.

Parameters

• fallback_method - The HTTP method that we should use to request the fallback_url. Can be: GET or POST and the default is POST. If an application_sid parameter is present, this parameter is ignored.
• fallback_url - The URL that we call using the fallback_method if an error occurs when requesting or executing the TwiML at url. If an application_sid parameter is present, this parameter is ignored.
• method - The HTTP method we should use when calling the url. Can be: GET or POST and the default is POST. If an application_sid parameter is present, this parameter is ignored.
• status
• status_callback - The URL we should call using the status_callback_method to send status information to your application. If no status_callback_event is specified, we will send the completed status. If an application_sid parameter is present, this parameter is ignored. URLs must contain a valid hostname (underscores are not permitted).
• status_callback_method - The HTTP method we should use when requesting the status_callback URL. Can be: GET or POST and the default is POST. If an application_sid parameter is present, this parameter is ignored.
• time_limit - The maximum duration of the call in seconds. Constraints depend on account and configuration.
• twiml - TwiML instructions for the call Twilio will use without fetching Twiml from url. Twiml and url parameters are mutually exclusive
• url - The absolute URL that returns the TwiML instructions for the call. We will call this URL using the method when the call connects. For more information, see the Url Parameter section in Making Calls.

@spec update!(String.t(), map() | keyword(), keyword()) :: Twilio.Schemas.Call.t()

Like update/3, but returns the result or raises Infusion.Runtime.Error.